You Needn’t Look at the Monitor

In a typical digital intraoral scanner, the dentist must look at a console display to evaluate the real-time progression of the scan. This need competes with the consideration of the scanner’s trajectory within the patient’s mouth, to avoid hitting teeth and causing patient discomfort. Continuum developed a simple, unambiguous visual signaling system, located on the DWIO wand, to indicate the real-time quality of the scan results. This shifts the dentist’s focus primarily to the wand, where the dentist would normally look when operating a standard dental instrument.

Simplify Sterilization and Cleaning

Regulatory bodies have safety directives about how disinfection or sterilization should take place. These directives can be burdensome to follow, make products difficult to use, or encourage less-than-ideal cleaning procedures. By designing generous physical spacing around elements that have patient contact, we simplified the cleaning process and allowed optional use of barrier covers. We also outlined a workflow that included simple accessories to ease the task of disinfection.

Eliminate the Foot Pedal

Most scanners employ a foot pedal to control the start and stop of digital scanning. Foot pedals are cumbersome (and unsanitary) to position, especially in small offices where a single unit might be transported between dental suites. Once positioned, they are easily kicked away and can be frustrating to find underneath the dental chair. Also, complications arise if the foot pedal requires multiple functions. We incorporated a gesture control module for high-level, non-contact control of the scanning parameters by the dentist. This eases the dentist’s interactions. Dentists often sit on the far side of the patient from the console and wear gloved hands during the procedure. By incorporating a simple and small set of gesture controls, the dentist can conduct all necessary interaction with the console.

Shrink the Wand

Inspired by the existing design of dental instruments, we studied the patient-dentist interaction, dental instrument geometries, and system performance. Our user studies influenced the broader technical team designing the sensor, and vice-versa. The result? The smallest wand in the industry, which provides greater comfort for the patient and allows the dentist to interact with a wand similar in size to instruments with which they are familiar.

Make It Affordable

We worked to determine key partners for our client. For example, the finish of the wand is a biocompatible finish, amenable to low-cost manufacturing. This key selection provided the desired look and feel, thermal performance, and size expected by the dentist. The wand cable material is responsive to two types of disinfection protocols and represented an affordable, low-cost solution. In conjunction with our client, and by careful consideration of off-the-shelf versus semi-custom approaches, we determined simple and low-cost ways of specifying a computation engine and its thermally appropriate enclosure.